dmesg - Intel Core i5-2400
microcode: microcode updated early to revision 0x29, date = 2013-06-12
Linux version 4.10.8-200.fc25.x86_64 (mockbuild@bkernel02.phx2.fedoraproject.org) (gcc version 6.3.1 20161221 (Red Hat 6.3.1-1) (GCC) ) #1 SMP Fri Mar 31 13:20:22 UTC 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
BIOS-e820: [mem 0x0000000040200000-0x00000000d8e21fff] usable
BIOS-e820: [mem 0x00000000d8e22000-0x00000000d9508fff] reserved
BIOS-e820: [mem 0x00000000d9509000-0x00000000d958ffff] usable
BIOS-e820: [mem 0x00000000d9590000-0x00000000d9632fff] ACPI NVS
BIOS-e820: [mem 0x00000000d9633000-0x00000000da5c2fff] reserved
BIOS-e820: [mem 0x00000000da5c3000-0x00000000da5c3fff] usable
BIOS-e820: [mem 0x00000000da5c4000-0x00000000da606fff] ACPI NVS
BIOS-e820: [mem 0x00000000da607000-0x00000000daa29fff] usable
BIOS-e820: [mem 0x00000000daa2a000-0x00000000daff3fff] reserved
BIOS-e820: [mem 0x00000000daff4000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000031f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: MSI MS-7678/H67MA-E45 (B3) (MS-7678), BIOS V3.2 01/17/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask F00000000 write-back
2 base 300000000 mask FE0000000 write-back
3 base 0E0000000 mask FE0000000 uncachable
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB800000 mask FFF800000 uncachable
6 base 31F800000 mask FFF800000 uncachable
7 base 31F600000 mask FFFE00000 uncachable
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff9479800fd7e0]
Base memory trampoline at [ffff947980098000] 98000 size 24576
reserving inaccessible SNB gfx pages
BRK [0x24937d000, 0x24937dfff] PGTABLE
BRK [0x24937e000, 0x24937efff] PGTABLE
BRK [0x24937f000, 0x24937ffff] PGTABLE
BRK [0x249380000, 0x249380fff] PGTABLE
BRK [0x249381000, 0x249381fff] PGTABLE
BRK [0x249382000, 0x249382fff] PGTABLE
BRK [0x249383000, 0x249383fff] PGTABLE
BRK [0x249384000, 0x249384fff] PGTABLE
BRK [0x249385000, 0x249385fff] PGTABLE
BRK [0x249386000, 0x249386fff] PGTABLE
BRK [0x249387000, 0x249387fff] PGTABLE
BRK [0x249388000, 0x249388fff] PGTABLE
Secure boot could not be determined
RAMDISK: [mem 0x35e3a000-0x36f14fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000D9615078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000D961EBB8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000D9615188 009A29 (v02 ALASKA A M I 00000022 INTL 20051117)
ACPI: FACS 0x00000000D9631080 000040
ACPI: APIC 0x00000000D961ECC8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000D961ED40 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000D961ED88 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: SSDT 0x00000000D961EDC8 0007CA (v01 Intel_ AoacTabl 00001000 INTL 20091112)
ACPI: HPET 0x00000000D961F598 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000D961F5D0 0004E9 (v01 IdeRef IdeTable 00001000 INTL 20091112)
ACPI: SSDT 0x00000000D961FAC0 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000D9620470 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: DMAR 0x00000000D9620F08 0000B0 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000031f5fffff]
NODE_DATA(0) allocated [mem 0x31f5cb000-0x31f5f5fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000031f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x000000001fffffff]
node 0: [mem 0x0000000020200000-0x000000003fffffff]
node 0: [mem 0x0000000040200000-0x00000000d8e21fff]
node 0: [mem 0x00000000d9509000-0x00000000d958ffff]
node 0: [mem 0x00000000da5c3000-0x00000000da5c3fff]
node 0: [mem 0x00000000da607000-0x00000000daa29fff]
node 0: [mem 0x00000000daff4000-0x00000000daffffff]
node 0: [mem 0x0000000100000000-0x000000031f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff]
On node 0 totalpages: 3114102
DMA zone: 64 pages used for memmap
DMA zone: 157 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13820 pages used for memmap
DMA32 zone: 884441 pages, LIFO batch:31
Normal zone: 34776 pages used for memmap
Normal zone: 2225664 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
PM: Registered nosave memory: [mem 0xd8e22000-0xd9508fff]
PM: Registered nosave memory: [mem 0xd9590000-0xd9632fff]
PM: Registered nosave memory: [mem 0xd9633000-0xda5c2fff]
PM: Registered nosave memory: [mem 0xda5c4000-0xda606fff]
PM: Registered nosave memory: [mem 0xdaa2a000-0xdaff3fff]
PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff947c9f200000 s108760 r8192 d30504 u524288
pcpu-alloc: s108760 r8192 d30504 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 3065285
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 12155104K/12456408K available (8529K kernel code, 1622K rwdata, 3532K rodata, 2136K init, 1816K bss, 301304K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:456 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-3.
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3100.064 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.12 BogoMIPS (lpj=3100064)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 31544 entries in 124 pages
smpboot: Max logical packages: 1
DMAR: Host address width 36
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
DMAR: RMRR base: 0x000000d949f000 end: 0x000000d94acfff
DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 8
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 00000007000000ff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (24812.22 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xd9590000-0xd9632fff] (667648 bytes)
PM: Registering ACPI NVS region [mem 0xda5c4000-0xda606fff] (274432 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pinctrl core: initialized pinctrl subsystem
RTC time: 9:41:40, date: 04/11/17
NET: Registered protocol family 16
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF947C90A51000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF947C904C4C00 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF947C904CAE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf7f09000-0xf7f0900f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7f06000-0xf7f063ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7f00000-0xf7f03fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7f05000-0xf7f053ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7f04000-0xf7f040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xf7ec0000-0xf7edffff]
pci 0000:02:00.0: reg 0x14: [mem 0xf7e00000-0xf7e7ffff]
pci 0000:02:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:02:00.0: reg 0x1c: [mem 0xf7ee0000-0xf7ee3fff]
pci 0000:02:00.0: reg 0x30: [mem 0xf7e80000-0xf7ebffff pref]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:04:00.0: [1106:3403] type 00 class 0x0c0010
pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d007ff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc0ff]
pci 0000:04:00.0: supports D2
pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: Enabled 4 GPEs in block 00 to 3F
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xd8e22000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9590000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda5c4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdaa2a000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0x1000-0x100f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x0400-0x0453] has been reserved
system 00:01: [io 0x0458-0x047f] has been reserved
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x0454-0x0457] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x20000000-0x201fffff] has been reserved
system 00:08: [mem 0x40000000-0x401fffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 04]
pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.5: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.6: PCI bridge to [bus 05]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff window]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:05: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS mismatch (64 != 32), using 64 bytes
Unpacking initramfs...
Freeing initrd memory: 17260K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd4e22000-0xd8e22000] (64MB) mapped at [ffff947a54e22000-ffff947a58e21fff]
audit: initializing netlink subsys (disabled)
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
SELinux: Registering netfilter hooks
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0d0 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf0d8 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f06000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.8-200.fc25.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f05000
ata1.01: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATA-8: Hitachi HUA722010CLA330, JP4OA3EA, max UDMA/133
ata2.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/133
scsi 0:0:1:0: Direct-Access ATA Hitachi HUA72201 A3EA PQ: 0 ANSI: 5
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.8-200.fc25.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.10.8-200.fc25.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:05:00.0
ata2.01: configured for UDMA/133
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.10.8-200.fc25.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: sig=0x206a7, pf=0x2, revision=0x29
microcode: Microcode Update Driver: v2.2.
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
sd 0:0:1:0: Attached scsi generic sg0 type 0
scsi 1:0:1:0: Direct-Access ATA Hitachi HUA72201 A3EA PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Fedora kernel signing key: 2cdb8b243fa15a40032b1035163a2ba0aaa3d581'
zswap: loaded using pool lzo/zbud
sda: sda1 sda2 sda3 sda4 < sda5 >
Key type big_key registered
sd 0:0:1:0: [sda] Attached SCSI disk
Key type encrypted registered
Magic number: 13:897:676
rtc_cmos 00:02: setting system clock to 2017-04-11 09:41:41 UTC (1491903701)
PM: Hibernation image not present or could not be loaded.
sd 1:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 1:0:1:0: [sdb] Write Protect is off
sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:1:0: [sdb] Attached SCSI disk
ata4.00: ATAPI: PIONEER DVD-RW DVR-219L, 1.01, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-219L 1.01 PQ: 0 ANSI: 5
sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg2 type 5
Freeing unused kernel memory: 2136K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1696K
Freeing unused kernel memory: 564K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
usb 1-1: new high-speed USB device number 2 using ehci-pci
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Swap.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket (/dev/log).
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xffffb6278192d000, 8c:89:a5:10:46:b9, XID 0c200000 IRQ 31
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
r8169 0000:03:00.0 enp3s0: renamed from eth0
e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock
firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x10
[drm] Memory usable by graphics device = 2048M
[drm] Replacing VGA console driver
Console: switching to colour dummy device 80x25
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
e1000e 0000:02:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:05:ca:27:84:bf
e1000e 0000:02:00.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:02:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-008
e1000e 0000:02:00.0 enp2s0: renamed from eth0
tsc: Refined TSC clocksource calibration: 3100.021 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2caf5bd675d, max_idle_ns: 440795281274 ns
random: fast init done
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:4e: registered as cooling_device9
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
usb 1-1.2: New USB device found, idVendor=0a12, idProduct=0001
usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-1.2: Product: CSR8510 A10
usb 2-1.1: New USB device found, idVendor=05e3, idProduct=0716
usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
usb 2-1.1: Product: USB Storage
usb 2-1.1: SerialNumber: 000000009727
usb-storage 2-1.1:1.0: USB Mass Storage device detected
scsi host4: usb-storage 2-1.1:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
random: crng init done
usb 1-1.3: new low-speed USB device number 4 using ehci-pci
fbcon: inteldrmfb (fb0) is primary device
usb 1-1.3: New USB device found, idVendor=046d, idProduct=c03e
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.3: Product: USB-PS/2 Optical Mouse
usb 1-1.3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C03E.0001/input/input3
hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.3/input0
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-1.4: new full-speed USB device number 5 using ehci-pci
firewire_core 0000:04:00.0: created device fw0: GUID 0010dc0001cdd06b, S400
usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Hub 2.0
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.4.4: new low-speed USB device number 6 using ehci-pci
usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=1828
usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.4: Product: HPE Mechanical Keyboard
usb 1-1.4.4: Manufacturer: HPE Mechanical Keyboard
input: HPE Mechanical Keyboard HPE Mechanical Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:04D9:1828.0002/input/input4
hid-generic 0003:04D9:1828.0002: input,hidraw1: USB HID v1.11 Keyboard [HPE Mechanical Keyboard HPE Mechanical Keyboard] on usb-0000:00:1a.0-1.4.4/input0
input: HPE Mechanical Keyboard HPE Mechanical Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:04D9:1828.0003/input/input5
systemd-journald[211]: Received SIGTERM from PID 1 (systemd).
hid-generic 0003:04D9:1828.0003: input,hidraw2: USB HID v1.11 Keyboard [HPE Mechanical Keyboard HPE Mechanical Keyboard] on usb-0000:00:1a.0-1.4.4/input1
clocksource: Switched to clocksource tsc
systemd: 15 output lines suppressed due to ratelimiting
scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0
scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE-A 9727 PQ: 0 ANSI: 0 CCS
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:1: Attached scsi generic sg4 type 0
sd 4:0:0:2: Attached scsi generic sg5 type 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
SELinux: 32768 avtab hash slots, 106778 rules.
SELinux: 32768 avtab hash slots, 106778 rules.
SELinux: 8 users, 14 roles, 5071 types, 307 bools, 1 sens, 1024 cats
SELinux: 94 classes, 106778 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
systemd[1]: Successfully loaded SELinux policy in 152.417ms.
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: Relabelled /dev and /run in 25.932ms.
EXT4-fs (sda5): re-mounted. Opts: (null)
systemd-journald[490]: Received request to flush runtime journal from PID 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
snd_hda_codec_realtek hdaudioC0D1: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D1: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D1: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D1: inputs:
snd_hda_codec_realtek hdaudioC0D1: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D1: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D1: Line=0x1a
snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: RAPL package 0 domain package locked by BIOS
audit: type=2000 audit(1491903700.483:1): initialized
audit: type=1130 audit(1491903701.778:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.778:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.785:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.808:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.830:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.832:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.850:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.853:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1491903701.889:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
r8169 0000:03:00.0 enp3s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
e1000e: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
show_signal_msg: 63 callbacks suppressed
lightdm-gtk-gre[952]: segfault at 10 ip 00007fd22b2b1f70 sp 00007ffd0f368ab8 error 4 in libcairo.so.2.11400.8[7fd22b244000+122000]
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.26)
perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79000
perf: interrupt took too long (3150 > 3147), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3952 > 3937), lowering kernel.perf_event_max_sample_rate to 50000
usb 1-1.4: USB disconnect, device number 5
usb 1-1.4.4: USB disconnect, device number 6
usb 1-1.4: new full-speed USB device number 7 using ehci-pci
usb 1-1.4: New USB device found, idVendor=05e3, idProduct=0606
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: USB Hub 2.0
hub 1-1.4:1.0: USB hub found
hub 1-1.4:1.0: 4 ports detected
usb 1-1.4.4: new low-speed USB device number 8 using ehci-pci
usb 1-1.4.4: New USB device found, idVendor=04d9, idProduct=1828
usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4.4: Product: HPE Mechanical Keyboard
usb 1-1.4.4: Manufacturer: HPE Mechanical Keyboard
input: HPE Mechanical Keyboard HPE Mechanical Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/0003:04D9:1828.0004/input/input15
hid-generic 0003:04D9:1828.0004: input,hidraw1: USB HID v1.11 Keyboard [HPE Mechanical Keyboard HPE Mechanical Keyboard] on usb-0000:00:1a.0-1.4.4/input0
input: HPE Mechanical Keyboard HPE Mechanical Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.1/0003:04D9:1828.0005/input/input16
hid-generic 0003:04D9:1828.0005: input,hidraw2: USB HID v1.11 Keyboard [HPE Mechanical Keyboard HPE Mechanical Keyboard] on usb-0000:00:1a.0-1.4.4/input1
usb 1-1.5: new full-speed USB device number 9 using ehci-pci
usb 1-1.5: New USB device found, idVendor=22b8, idProduct=4902
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Motorola Phone (L2)
usb 1-1.5: Manufacturer: Motorola Inc.
cdc_acm 1-1.5:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters